Ceramic tile and grout are one of the most neglected floors. Floor and wall surfaces are over looked because of the care involved in cleaning them. Scrubbing each tile and grout line for hours with a small brush and using irritating, harsh, and unsafe chemicals can be annoying. 

The Steam Team skillfully accomplishes the proper cleaning of ceramic tile. Heating purified water to over 200 degrees, we then inject an oxygenated form of hydrogen peroxide under 800+ lbs of pressure utilizing very specific tools and attachments. The cleaning results speak for themselves. Whether your tile is in your kitchen, bathroom, commercial showroom or some other area of your home, those stubborn stains, embedded bacteria, and germs don’t stand a chance. Your tile and grout will look very much as it did the day it was installed.

Cleaning Process

1. Pre-Inspection:

Technicians will make note of all challenging areas and set your expectations as well as come up with a solution for each area.

2. Area Preparation:

We will prepare the areas surrounding the tile, making sure not to disturb any carpeted or hardwood floors. At this point all furniture that will be cleaned under is moved.

3. Dry soil removal:

Our technicians thoroughly sweep and vacuum the entire area, maximizing the results we obtain. As in any cleaning process, dry soil removal is the most important.

4. Soil Suspension:

We use the highest quality products. The cleaning agent sprayed over the entire surface of your tile is the most scientifically advanced tile cleaner on the market.

5. Cleaning:

Complex and difficult areas are agitated manually with a brush and for really challenging heavy use areas, a mechanical rotating brush is employed. The entire floor is then cleaned using a state of the art self-contained pressure cleaning system.

6. Rinsing:

A rinse solution is pumped through the machine during cleaning, sanitizing and balancing the pH of your floor.

7. Sealing/Finishing:

The type of sealer and application varies on what surface it is being applied to. (If grout is in need of colorizing, this is done before the sealing process).

8. Post-inspection:

Technicians will initiate a walk through and go over results before leaving.